Caratbody
10ml can be described as a filler for the body based on Patented Microbeads
made of Cross-linked Hyaluronic Acid. They use this product to benefit the
augmentation of breasts and buttocks.
In
reality, Caratbody 10 ml is a body filler made from Patented Microbeads made of
cross-linked hyaluronic acid. It's also useful exclusively for body use. But,
women can use it to help with breast and buttock enhancement.
Patent 3 Staged Microbeads 3 Phased Hyaluronic Acid
Cross-linked Technology (Patented MCL * technology )
Caratbody 10 ml is a sterilized product with a gel-type,
non-toxic bridge to the hyaluronic acid taken from microorganisms.
The hyaluronic acids bridged are included inside a
disposable needle and are to be injected only into one patient. It is not
recommended to be dispensed and injected into two persons. What will list the
amount of packaging or capability of this product outside the package box?
Caratbody 10ml is a disposable medical device made of
sterile material that autoclaves (121 degrees Celsius, 18 min) and is not
intended to be reused.
Caratbody employs the patented three-staged microbead
processing technique, which allows us to boost the viscosity and create a
long-lasting filler. By controlling the crosslinking speed to alter the
consistency, Caratbody can create an array of premium fillers based on their
use.
Caratbody uses a unique method of creating a semi-solid
gel made of Hyaluronic Acid. It has high cohesiveness and viscosity, so when
injection occurs, it can create a capsule implanted so that the natural enzyme
hyaluronidase doesn't easily break it down within the body (the mechanism that
has a long-lasting impact).
More concentrated / larger particle size
Semi-solid Gel type Caratbody
Caratbody has solved the challenges it faced with
crosslinking by increasing its speed to produce a durable and easily removed
product.
There is no need to fret about the results not being
satisfactory after the injection. Caratbody is extremely strong against natural
hyaluronidase within the body. However, who can eliminate it through the
infusion of hyaluronidase? Then, who can remove the filler left within the soft
tissue completely? It's easy to remove.
Our product has a great volume effect due to its high
hydrophilic capability and solid molecular structure, even after the high
crosslinking rate.
1. Check the status of the packaging as well as the contents of the product.
2. Acquaint yourself enough with the instruction manual.
3. Use the sterilized and packaged product.
4. Remove the packaging with care and remove the syringe.
5. Open the package and examine the injection capacity in the syringe. Also, check for any cracks, distortions, or damage to the appearance.
6. To prevent contamination, choose a needle syringe suitable for the area to be injected and then remove the cap from the syringe. Connect the needle to the syringe.
7. This product has to be in the dermis.
8. Dispose of following the use of quantity in the syringe due to the user's preference.
9. For 1.1ml Face filler product, Ultra-thin Wall 25G 13mm needle (with 0.4mm depending on the inside diameter) is recommended in the event of a product that has not to include the needle.
10. During the injection, it is advised that the bevel at the needle's end be facing upwards. The shape of the needle is observed from the skin to determine the needle's depth. While the needle's silhouette underneath the skin is not easily seen. Once the syringe is placed, you can slowly inject and insert it into your skin. You withdraw the needle in the same direction during insertion. Do not press the plunger when the needle withdrawal from the skin to prevent the carat body from leaking out of the needle's point.
To attain the desired effect achieve the desired result, the injection must be injected into the deep dermis. If the infusion is not deep or in the inner layer of muscles, the hyaluronic acids will degrade rapidly, which causes the duration to be cut down. If the injection is not sufficiently light, it could cause an eerie blue discoloration of the skin or the skin bulging.
11.
For 10ml of body
filler, It is suggested to use a 16-18G Cannula (Semi-permanent cannula).
Inject the cannula into the fat layer and proceed with controlled shaking and
turn to break down the fat tissues; let the fat layer open up before injecting.
* To enhance the breasts injectors, it is recommended to
do the procedure in the upper part of the breast. Don't inject through the
lower part of the breast. If you do, there could be sagging or ptosis.
The concentration of HA 20 mg/ml
Ingredient: Sodium Hyaluronate Gel
Injection area: deep dermis, shallow subcutaneous tissue
Storage conditions: Store
at room temperature
Beware of direct sun.
Avoid storing with freezing.
Shelf time:36 months
There are no reviews yet.
Login to review this product
The Standard chunk of lorem ipsum reproduced below those interested.